steel structure building installation

Steel Structure Building Installation Process

Here are preliminary steps that should be done before Steel Structure Building Installation:

  • Keep under surveillance on the property where the building will be located in. This will better enable you to know the right size building as well as inform you, for doors and window placements where the best locations will be.
  • Must verify local building codes. No matter the size project, most building departments will have some code standards that must be met. Deserting this step can result in a great deal of unwanted future expenses.

Steel Structure Building Installation

1. Prepare Foundation

The fundamental to success for any steel building project starts with a properly prepared and implemented foundation. Any steel building construction company will provide you with all the necessary drawings and information to locate and set your anchor bolts. It is essential to use an experienced foundation contractor so that the slab turns out flat and the anchor bolts are properly located. If all of this is done correctly, your steel building will be a breeze to install.

2. Lay out Delivered Materials

Most building producers convey Anchor bolt designs (settings) inside three weeks of procurement, which will have erection grouping, appropriate capacity, and security data. A total installation manual is regularly sent when building materials show up. Kindly allude to these records for more nitty-gritty directions prior to install a steel building.
Lay out your building materials appropriately around the foundation. Spot the columns and rafters at whatever end you mean to begin. You will move them with your crane to their permanent areas. Put sheeting bundles on wood blocks around the foundation as close as conceivable to where they will be installed. Then, layout trims, sheeting boards, and protection in an area far removed. These things will be the last items installed.

3. Primary Framing

The Primary Framing comprises of the fundamental I-Beam sections and rafters. All the essential steel is pre-welded, pre-cut, and pre-punched for simple installment. These are the heaviest and most grounded individuals that you will bolt together and affix to your foundation. When a couple of your casings are up, you can begin to bolt the optional individuals to the essential framing.

4. Secondary Framing

The Secondary Framing comprises of girts, purlins, and framed openings. These individuals are pre-cut and pre-punched and give the strength behind the wall and rooftop sheeting. When all the secondary framing is set up, you would then be able to move to the rooftop and wall sheeting.

5. Roof and Wall Sheeting

Since you have the essential and secondary framing complete, the time has come to install the insulation alongside the wall and rooftop sheeting. You will start introducing the wall sheeting first. The sheeting is screwed to the secondary framing using Lifetime self-drilling fasteners. When the walls are done, move to the rooftop boards and furthermore install the climate stripping which will keep the structure release free.

6. Trim and Accessories

The last step to finishing your steel building is installing the trim and any accessories. The trim truly finishes off the building and makes a climate snugness seal. Embellishments like the doors, windows, and vents are installing as of now too.

Steel Building Components

steel structure building installation process

First and foremost, it’s vital to go over the various components that make up a steel building.

The key structural members that support the building’s sub-structural components are called the main frames. They support the roof sub-structural members, called purlins, and wall members called girts.
Prior to the main frames arriving on-site, the concrete foundation is poured and anchor bolts are set in the curing concrete. Later, when the steel building contractor arrives with the main frames, construction of the structure can begin immediately by attaching the main framing to the anchor bolts.

Once all of these parts come together, the steel building is erected in no time. While this lightning-fast speed is impressive, you may wonder how everything stays together. After all, it seems like everything is so light and open at this point.

Cable bracing in the roof helps transfer longitudinal loads (loads acting perpendicular to the end walls) to the portal frames or sidewall bracing. Portal frames or sidewall bracing on the side walls transfer these loads to the foundation.

The main frames, since they are moment resisting frames, can transfer the lateral loads (loads acting perpendicular to the side walls) to the foundation directly with no additional bracing needed.

Cees and Zees

Cees and zees are frequently alluded to as secondary sub structural components. Cees and zees are appended to the main frames and together they offer by and large help for the construction and a connection point for wall and rooftop boards.

The building architect will pick whether they’d like to use a cee or zee, which both arrive in a wide assortment of sizes and measures. Eventually, the size of the part relies upon how much burden they need to oppose, which is normally a choice made by the venture engineer dependent on nearby code prerequisites.

Window and Door Framing

There should framing applied to any space where there will be a window or door. The windows are normally a pre-framed unit that pops directly into the assigned opening and gets precisely joined. The doors are comparable and many are self-framing doors which takes out the requirement for extra cold-form framing. The door frames will be installed in the predetermined areas and joined by the sub- structural members.


If you want to get a steel structure building installation, we’re your best bet. We’ve been in the industry as the best Steel Building Construction Company in Bangladesh for over 12 years and have an impeccable track record of customer satisfaction. From structural engineering to installation, our team is fully equipped with all the knowledge and experience necessary for success. Want more information? Request a quote today!